1 1

Davies Craig

DC8165

Davies Craig EWP150 BLACK - Remote Electric Water Pump (12V)

Davies Craig EWP150 BLACK - Remote Electric Water Pump (12V)

€219,16 EUR
€219,16 EUR
Sale Sold out
Taxes included.

EWP150 BLACK - Remote Electric Water Pump (12V) (SKU: DC8165) predstavlja sam vrh tehnologije u području hlađenja motora. Električne vodene pumpe (EWP) branda Davies Craig dokazani su izbor u trkaćim serijama širom svijeta jer zamjenom tradicionalne mehaničke pumpe oslobađaju dodatnu snagu motora, osiguravaju stalan protok neovisno o broju okretaja (RPM) i sprječavaju destruktivno pregrijavanje motora nakon gašenja vozila.

\n\n
\n
\n
\n EWP®150 Black Remote Electric Water Pump (12V)\n
\n
\n Part DC8165\n
\n
\n\n
\n

\n Celebrating 50 years, Davies Craig Pty Ltd has launched a ‘BLACK LABEL’ EWP®150 Remote-Mounted Electric Water Pump! This attractive model is supplied in glorious matt black powder-coat.\n

\n\n

\n Muscle up your engine cooling system with the EWP®150 Black. Designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat & intercooler applications. This rugged alloy hi-flow pump increases power and improves coolant temperature control.\n

\n
\n
\n\n
\n
\n Purchase options\n
\n\n
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
OptionPart DCNotes
\n Pump Only\n \n DC8165\n EWP®150 Black Alloy 12V pump only.
KitDC8065Pump kit option with essential wiring and fitting hardware.
Combo with ControllerDC8975Combo pack with controller solution.
\n
\n
\n\n
\n
\n Contents (Part DC8165)\n
\n\n
\n \n \n \n \n \n \n \n \n \n \n \n \n \n
DescriptionUnits
EWP®150 Black Alloy - Electric Water Pump (12V)1
\n
\n
\n\n
\n
\n Technical specifications\n
\n\n
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
Operating voltage3V DC to 15V DC
Maximum current10A @ 13V
Flow rate (max)162 L/min (42.8 US gal/min) @ 13V DC
Operating temp.-40° to 120°C (-40° to 248°F)
Pump designClockwise centrifugal with volute chamber
Pump weight1,170 grams (2.6 lb)
Pump materialAluminium (Powder Coated Black)
Burst pressure500 kPa (72.5 psi)
Internal FittingsInlet & Outlet: -16AN ORB
Self primingNo, none of our pumps are self-priming
Fits hose sizes35mm to 51mm (1.38” to 2”)
Push-on fitting size\n EWP inlet & outlet 38mm\n
    \n
  • with 3mm Sleeve (DC8510) 44mm
    • \n
  • with 6mm Sleeve (DC8511) 51mm
    • \n
\n
\n
\n
\n\n
\n
\n Installation demonstration & controller overview\n
\n\n
\n

\n EWP & Controller Installation Demonstration\n

\n\n
\n \n
\n\n
\n

\n Combined with an LCD EWP®/Fan Digital Controller (Sold separately Part DC8002 or combo DC8965) will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature, eliminating ‘heat soak’ and extending engine life. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency.\n

\n
\n
\n
\n\n
\n
\n Key benefits\n
\n\n
\n

The world’s most advanced total engine cooling management system:

\n\n
\n
\n \n \n \n  universal fit\n
\n\n
\n \n \n \n  more power\n
\n\n
\n \n \n \n  more cooling\n
\n\n
\n \n \n \n  increase fuel efficiency\n
\n\n
\n \n \n \n  extend engine life\n
\n\n
\n \n \n \n  world-leading technology\n
\n
\n
\n
\n\n
\n
\n EWP® installation options\n
\n\n
\n
\n \n Installing an EWP® as an AUXILIARY PUMP\n \n
    \n
  • Leaving the mechanical water pump in place, install the EWP® into the bottom radiator hose.
    • \n
  • Remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation when the thermostat is closed. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.
    • \n
\n
\n\n
\n \n EWP® installation – disabling the mechanical water pump\n \n
    \n
  • Leaving the mechanical water pump in place, install the EWP® into the bottom radiator hose and remove the manufacturer’s thermostat.
    • \n
  • You will need to bypass the water pump pulley by installing an appropriate length belt (not supplied). This method makes for an easy installation.
    • \n
  • If running the pump continuously remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.
    • \n
\n

\n In both cases, the EWP® pumps past the impeller of the mechanical water pump.\n

\n
\n\n
\n \n Disengaged mechanical water pump (recommended)\n \n
    \n
  • Remove the mechanical water pump and remove the thermostat.
    • \n
  • Then remove the impeller from the mechanical pump shaft. Retain the mechanical water pump using the pump pulley as an idler to avoid re-routing the drive belt.
    • \n
  • Block bypass passages and re-install the disengaged water pump ensuring that all gasket surfaces are clean and the new gaskets are properly fitted to prevent leaks.
    • \n
  • Install the EWP® into the bottom radiator hose.
    • \n
\n
\n\n
\n \n Removed mechanical water pump (ideal)\n \n
    \n
  • Remove the mechanical water pump and thermostat from the engine.
    • \n
  • Install a Davies Craig EWP® header adaptor or blanking plate (not supplied). Ensuring the gasket surfaces are clean and the appropriate gasket or sealant is used to prevent leaks.
    • \n
  • Install the EWP® into the bottom radiator hose (hose modification/replacement may be required).
    • \n
  • Fit an appropriate length belt (not supplied) to drive accessories.
    • \n
\n
\n\n

\n In most cases the EWP® is supported by the radiator hose. If mounting is required, soft-mount the pump to protect against vibration. For EWP®115, EWP®140 and EWP®150, mounting bracket Part DC8700 or DC8710 is recommended.\n

\n
\n
\n\n
\n \n PRODUCT SELECTION GUIDE\n \n\n
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
\n EWP® PRODUCT SELECTION GUIDE\n
APPLICATIONPUMP
MODEL		PUMP ONLYPUMP KITPUMP COMBO
12V24V12V24V12V24V
Engines up to 2.0L
(Standard)		EWP®80DC8106 Flange
DC8109 Barb 		N/ADC8006 Flange
DC8009 Barb 		N/ADC8908 Flange
DC8919 Barb 		N/A
Engines up to 2.0L - 3.5L
(Standard)		EWP®115DC8125 Nylon
DC8140 Alloy 		DC8126 Nylon
DC8141 Alloy 		DC8025 Nylon
DC8040 Alloy 		N/ADC8930 Nylon
DC8950 Alloy 		N/A
Engines up to 3.5L - 5.0L
(Standard)		EWP®140DC8180 Alloy DC8181 Alloy DC8080 Alloy N/ADC8990 Alloy N/A
Engines 5.0L or greater
(Standard)

Modified Engines
Supercharged/Turbo,
Drag Racing, 4WD,
Off Road, Drifting & Speedway		EWP®150DC8160 Silver
DC8165 Black 		DC8161 Silver DC8060 Silver
DC8065 Black 		DC8061 Silver DC8970 Silver
DC8975 Black 		DC8971 Silver
Intercooler
(depending on capacity)		EWP®115DC8125 Nylon
DC8140 Alloy 		DC8126 Nylon
DC8141 Alloy 		DC8025 Nylon
DC8040 Alloy 		N/ADC8930 Nylon
DC8950 Alloy 		N/A
EWP®140DC8180 Alloy DC8181 Alloy DC8080 Alloy N/ADC8990 Alloy N/A
EWP®150DC8160 Silver
DC8165 Black 		DC8161 Silver DC8060 Silver
DC8065 Black 		DC8061 Silver DC8970 Silver
DC8975 Black 		DC8971 Silver
EWP®160N/AN/ADC8430N/AN/AN/A
EWP®180N/AN/ADC8450DC8451N/AN/A
\n
\n
\n

Tehničke Specifikacije

  • Težina: 1.4 kg
  • EAN / Barkod: 9311669081653

Službena dokumentacija i podaci: Proizvod je pokriven jamstvom i tehničkom podrškom proizvođača. Za dodatne tehničke detalje, dijagrame ugradnje i specifikacije posjetite službenu stranicu proizvođača Davies Craig Australia.

View full details

HAVE YOU SEEN IT CHEAPER? CONTACT US!

IN ORDER TO PROVIDE YOU WITH TOP PARTS AT TOP PRICES, WE ENCOURAGE YOU TO CALL US WITH A LINK TO A BETTER OFFER THAN OURS AND WE WILL INVEST ALL THE TRUMPETS AND BEAT THE PRICE

CONTACT