Davies Craig EWP Mounting Bracket suits 115-130-150

\n \n \n

\n

\n The Davies Craig EWP^® Mounting Bracket Kit adds another prodigious mounting alternative to the technique by which customers can securely install their remote-mounted pump. While Davies Craig has always acknowledged the lightweight EWP^® range can be self-supporting while connected to the radiator hose, this bracket offers first-rate mounting flexibility.\n

\n\n

\n It assists with the hard mounting of the EWP^® to the engine bay or chassis by providing a custom-moulded rubber dampener to minimise vibration damage and secure the pump tightly.\n

\n

\n Compatibility & Features\n

\n

\n This mounting accessory offers a reliable hold and is designed specifically to be used with both Nylon and Alloy versions of the following EWP^® models:\n

\n

\n
• EWP^®115 (Nylon & Alloy)
\n
• EWP^®130 / EWP^®140 (Alloy)
\n
• EWP^®150 (Alloy)
\n
• Vibration Minimisation: The included rubber damper loops securely around the pump, isolating it from harsh engine and chassis vibrations.
\n
• Secure Fitment: Features a robust outer steel ring tightened by a hex bolt and Nyloc nut for reliable, long-lasting holding power.
\n

\n

\n Kit contents (Part DC8700)\n

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Part description	Units
Rubber Damper	1
Steel Ring	1
Hex Bolt (1 ¾" x 3/16")	1
Nyloc Nut (3/16")	1

\n

\n Important Installation Notes\n

\n

\n
• Correct Positioning: When looping the rubber damper over the EWP's circumference, ensure the rubber tabs sit flush against the top rim of the pump housing to achieve a secure fitment.
\n
• Outlet Clearance: Before fully tightening the bolt, double-check that the clamp and the bolt mechanism are located away from the EWP^® outlet. If positioned incorrectly, hose fitment and routing can be compromised.
\n

\n