Davies Craig
Inventarna šifra proizvoda (SKU):DC8105
Davies Craig EWP80 - Remote Electric Water Pump (12V)
Davies Craig EWP80 - Remote Electric Water Pump (12V)
Učitavanje dostupnosti preuzimanje nije moguće
EWP80 - Remote Electric Water Pump (12V) (SKU: DC8105) predstavlja sam vrh tehnologije u području hlađenja motora. Električne vodene pumpe (EWP) branda Davies Craig dokazani su izbor u trkaćim serijama širom svijeta jer zamjenom tradicionalne mehaničke pumpe oslobađaju dodatnu snagu motora, osiguravaju stalan protok neovisno o broju okretaja (RPM) i sprječavaju destruktivno pregrijavanje motora nakon gašenja vozila.
\n This part has been discontinued. Please see the replacement options below:\n
\n \n| Discontinued Part # | \nDirect Replacement | \nAlternative Replacement | \n
|---|---|---|
| 8105 (Pump Only) | \n#8106 | \n#8109 | \n
| 8005 (Kit) | \n#8006 | \n#8009 | \n
| 8907 (Combo) | \n#8908 | \n#8919 | \n
\n The EWP®80 is available for purchase in following options:\n
\n- \n
- Pump Only (Part #8105) \n
- Kit (Part #8005) \n
- Combo with Controller (Part #8907) \n
\n The EWP®80 Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres.\n
\n| Part description | \nUnits | \n
|---|---|
| EWP®80 - Nylon 12V Assembly | 1 |
| 5x12 Flanged Hex Set Screw Zinc Silver | 6 |
| 5x16 Flanged Hex Set Screw Zinc Silver | 6 |
| M5 FLANGE NUT ZINC SILVER | 6 |
| Operating voltage | 3V DC to 15V DC |
| Maximum current | 7.5A @ 13V |
| Flow rate (max) | 90 L/min (23.8 US gal/min) @ 13V DC |
| Operating temp. | -40° to 120°C (-40° to 248°F) |
| Pump design | Clockwise centrifugal with volute chamber |
| Pump weight | 900 grams (2.0 lb) |
| Pump material | Nylon 66, 30% glass-filled |
| Burst pressure | 350 kPa (50 psi) |
| Seal | Ceramic face seal |
| Fits hose size | 32mm to 51mm (1⅜” to 2”) |
Installing an EWP® as an AUXILIARY PUMP
\n- \n
- Leaving the mechanical water pump in place, install the EWP® into the bottom radiator hose. \n
- Remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation when the thermostat is closed. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required. \n
EWP® installation – disabling Mechanical water pump
\n- \n
- Leaving the mechanical water pump in place, install the EWP® into the bottom radiator hose and remove the manufacturer’s thermostat. \n
- You will need to bypass the water pump pulley by installing an appropriate length belt (not supplied). This method makes for an easy installation. \n
- If running the pump continuously remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation. \n
Disengaged mechanical water pump (recommended)
\n- \n
- Remove the mechanical water pump and remove the thermostat. \n
- Then remove the impeller from the mechanical pump shaft. Retain the mechanical water pump using the pump pulley as an idler. \n
- Block any bypass passages and re-install the disengaged water pump. \n
- Install the EWP® into the bottom radiator hose. \n
Removed mechanical water pump (Ideal)
\n- \n
- Remove the mechanical water pump and thermostat from the engine. \n
- Install a Davies Craig EWP® Header Adaptor or blanking plate (not supplied). \n
- Install the EWP® into the bottom radiator hose. \n
\n In most cases EWP® will be adequately supported by the radiator hose. For the EWP®115, EWP®140 and EWP®150 Part #8700 or #8710 Mounting bracket is recommended.\n
\n\n PRODUCT SELECTION GUIDE (click to expand)\n
\n|
PRODUCT SELECTION GUIDE Electric Water Pump (EWP®) | \n |||||||
| APPLICATION | \n\n PUMP \nMODEL \n | \n PUMP ONLY | \nPUMP KIT | \nPUMP COMBO | \n|||
| 12V | \n24V | \n12V | \n24V | \n12V | \n24V | \n||
|
Engines up to 2.0L (Standard) | \n EWP®80 | \n
#8105 Nylon #8106 Flange #8109 Barb | \n N/A | \n
#8005 Nylon #8006 Flange #8009 Barb | \n N/A | \n
#8907 Nylon #8908 Flange #8919 Barb | \n N/A | \n
|
Engines up to 2.0L - 3.5L (Standard) | \n EWP®115 | \n
#8125 Nylon #8140 Alloy | \n
#8126 Nylon #8141 Alloy | \n
#8025 Nylon #8040 Alloy | \n N/A | \n
#8930 Nylon #8950 Alloy | \n N/A | \n
|
Engines up to 3.5L - 5.0L (Standard) | \n EWP®140 | \n#8180 Alloy | \n#8181 Alloy | \n#8080 Alloy | \nN/A | \n#8990 Alloy | \nN/A | \n
|
Engines 5.0L or greater (Standard) Modified Engines Supercharged/Turbo, Drag Racing, 4WD, Off Road, Drifting & Speedway | \n EWP®150 | \n
#8160 Sliver #8165 Black | \n #8161 Silver | \n
#8060 Silver #8065 Black | \n #8061 Silver | \n
#8970 Silver #8975 Black | \n #8971 Silver | \n
|
Intercooler (depending on capacity) | \n EWP®115 | \n
#8125 Nylon #8140 Alloy | \n
#8126 Nylon #8141 Alloy | \n
#8025 Nylon #8040 Alloy | \n N/A | \n
#8930 Nylon #8950 Alloy | \n N/A | \n
| EWP®140 | \n#8180 Alloy | \n#8181 Alloy | \n#8080 Alloy | \nN/A | \n#8990 Alloy | \nN/A | \n|
| EWP®150 | \n
#8160 Sliver #8165 Black | \n #8161 Silver | \n
#8060 Silver #8065 Black | \n #8061 Silver | \n
#8970 Silver #8975 Black | \n #8971 Silver | \n|
Tehničke Specifikacije
- Težina: 0.95 kg
- EAN / Barkod: 9311669081059
Službena dokumentacija i podaci: Proizvod je pokriven jamstvom i tehničkom podrškom proizvođača. Za dodatne tehničke detalje, dijagrame ugradnje i specifikacije posjetite službenu stranicu proizvođača Davies Craig Australia.
Share

VIDJELI STE JEFTINIJE? JAVITE NAM SE!
KAKO BI VAM OMOGUĆILI VRHUNSKE DIJELOVE PO VRHUNSKIH CIJENAMA POTIČEMO VAS DA NAM SE JAVITE SA LINKOM NA BOLJU PONUDU OD NAŠE I ULOŽITI ĆEMO SVE ADUTE TE NADMAŠITI CIJENU